$3,057.54
| Speed Range | 2500 to 4350rpm | |
| Capacity | 6 x 2.0ml (Screw cap /skirted and non-skirted) | |
| Timer | 1 sec. to 90 sec. with up to 10 cycles | |
| Dimensions | 8.6 x 14 x 8 in / 22 x 35.5 x 20.5 cm | |
| Weight | 20 lbs / 9 kg | |
| Warranty | 2 years | |
| Electrical | 100-240V 50-60 Hz |
The BeadBug™ 6 joins the large capacity BeadBlaster™ 24 and personal sized
BeadBug™ 3 as the newest member of the Benchmark homogenizer line.
Like the other members of the Benchmark Microtube Homogenizer family, the
BeadBug 6 utilizes a three dimensional shaking motion to disrupt samples. This
motion, when combined with beads of the appropriate size and material, causes
high velocity impacts with the sample and is an extremely fast and efficient
method for releasing cellular contents, including nucleic acids and proteins.
Many different sample types, from cells in culture to organ tissues and bone
can be homogenized in the BeadBug 6, most within 45 seconds. Programming
the unit is very simple – just set the speed, time, number of cycles and pause
between cycles, then press start. For convenience, the last programmed
parameters remain in memory for repeated runs.
Sealed tubes prevent cross contamination in the BeadBug 6. Samples are
simply loaded into the tubes along with the beads and placed in the unit for
processing. After homogenization, tubes are spun briefly in a centrifuge, and
the lysate removed with a pipette.
Designed to fit the needs of medium throughput laboratories, the BeadBug 6 can
simultaneously process up to six samples in 2.0ml tubes. With optional adapters,
the unit will also accept two 5.0ml tubes. A full range of bead materials and
sizes are available in both prefilled tubes and in bulk to meet all your sample
processing needs.
